Color strip steel production line entry section, Double uncoiling configuration, uncoiling machine with power, active uncoiling, uncoiling section tension can be adjusted: hydraulic drive, hand,Move on;Hydraulic shear is adopted in the inlet shear to improve the flexibility of the preparation...Send InquiryChat Now
Color strip steel production line
Double uncoiling configuration, uncoiling machine with power, active uncoiling, uncoiling section tension can be adjusted: hydraulic drive, hand,Move on;Hydraulic shear is adopted in the inlet shear to improve the flexibility of the preparation process.The sewing machine has an independent hydraulic system, single row sewing, and the punching process is completed simultaneously::Equipped with a press, the joint and edge burr are flattened.The material storage capacity of the inlet sleeve is 120m, which ensures 2 minutes of rewinding operation.
The pretreatment is fully enclosed, including pre-degreasing, roller brush, degreasing, washing and pure waterComplete processes such as direct blanking;3. The pre-treatment process is equipped with a squeezer between various processes to ensure the relative stability of the tank fluid and the shoes on the plate surface.Clean and dry:4. The reservoir in each process is equipped with automatic temperature monitoring and overtemperature alarm:5. The degreasing process is equipped with an oil removal device to extend the service life of the liquid;6. Prior treatment is equipped with water vapor emission system:7. Equipped with a hot air blowing and sweeping device, the plate surface after pre-treatment is dried:8. Equipped with jinhua coating machine for chromizing treatment and drying into film through a water vapor drying oven:9. The paint roller is equipped with the center mechanism before painting;10. The roughing machine is directly and completely coated with two sets of governor and jin, each set is equipped with adjusting silver, which can be knotted.Correct the thickness of the paint; Two sets of roller coated tube so that the light can achieve rapid color change..11. There is a ventilation system in the roller painting operation room: before the paint curing, there is a closed flow flat room: fixed The organic waste gas in the incinerator enters the incinerator for pyrolysis at high temperature; The residual heat is recovered by heat exchange, used, used for paint drying and painting curing furnace.2After curing high temperature color plate through air cooling, fog cooling, water cooling three sections of cooling, avoidSudden cooling and cracking of paint film: